TWH-XTC-950, Toyota, Tercel, 91, 92, 93, 94 Toyota Tercel RADIO WIRE HARNESS INSTALL MP3 CD RADIO 1988-1998
Installation Parts - Radio Wire Harness for Stardard Systems
Not for (Amplified / Premium) Systems
Aftermarket wire harnesses connect an aftermarket radio into your car
This part is needed when removing Stock Radio and Upgrading to Aftermarket Stereo for first time
Get Right the first time when installing an aftermarket stereo to your vehicle
These are the same harnesses the Professional Install shops use.
Save Money - Do It Yourself and get the same results as the Pros
Example of Aftermarket Stereo:
(Alpine, Kenwood, Pioneer, Sony) or any new upgraded stereo that replaces the stock radio the car originally came with.
When installing an Aftermarket Stereo to Car - you will need this harness.
EIA WIRING COLOR CODE
- 12 Volt Ignition/ Acc.
- 12 Volt Battery/Memory
- Power Antenna
- Amp Turn-On
- Amp Ground
- Phone Mute
- Right Front Spk+
- Right Front Spk -
- Left Front Spk+
- Left Front Spk-
- Right Rear Spk+
- Right Rear Spk-
- Left Rear Spk+
- Left Rear Spk-
Directions for Stereo install:
Simply connect the color-coded wire Harness from Carxtc to the wire harness from aftermarket radio.
(Match the Colors together - Red to Red, Yellow to Yellow, etc.)
Easily Connect the wires together in the comfort of home or garage
Lots easier than struggling with a gear shifter or cramped space inside your car.
Then plug OUR harness into the vehicle harness (the plug disconnected from the factory radio)
Drive off with your new system. (As easy as 1-2-3 really)
Keep the Warranty of Vehicle:
Best of all, you didn't have to cut off your car's original radio connector.
So when its time to sell or return vehicle, just re-connect the stock radio
(No cutting of wire) keeps the manufacture warranty.
(Just Unplug, Reconnect factory radio, and use the aftermarket radio for you new car.)
WIRE HARNESS TO INSTALL AFTERMARKET STEREOS BELOW:
TOYOTA AFTERMARKET CAR STEREO RADIO WIRING HARNESS PLUG
WORKS WITH THESE MAKE YEAR AND MODELS BELOW
Plugs into factory harness
NOTE: This harness works on standard wiring only. Not for amplified, JBL, or premium sound systems